The mini-light word is a new type of illuminating stone product that has been developed since 2013. It is made of imported high-molecular materials. It is beautiful, exquisite, compact and elegant, noble and fashionable. It is the new era photoelectric stone. New darling. Appearance is better than ordinary advertising characters, very stylish and attractive advertising craft products.
Mini word application areas: including high-end places, brand stores, brand chains and so on.
The tools required to make a mini luminous word with an advertising engraving machine are as follows:
1. Advertising engraving machine: 1 set
2, tool selection: mini word dedicated engraving machine equipment universal: 12mm and 14mm tool holderOrdinary advertising engraving machine is recommended: imported 6mm handle!
3, imported polymer materials (plexiglass is acrylic)
4, LED light source and adapter
5, paint and 502 glue
The method of making a mini luminous word with an advertising engraving machine is as follows:
1. Make computer files, edit and typeset with CDR software, typeset according to the actual 1:1 size, note that the strokes should not be too small, and ensure that the smallest LED module can be placed (the minimum LED strip is 5mm).
2. Select the material used, the imported polymer acrylic material used in the mini-lighting word, the advantage is that the cutting is smooth and smooth. Production equipment: Place the required specifications on the mini-engraving machine, then link the completed documents to the engraving machine and start working. At present, the professional mini-word engraving machine is very smooth and thorn-free when cutting acrylic, and the processing at the corner of the word is smooth.
3. The engraving of the mini luminous characters is completed in several steps:
1), the back of the word is slotted;
2), the front side of the word is inverted;
3), cut out on the front;
4) cutting out the bottom plate;
4. After the carving by the professional mini-word engraving machine, clean up and install the LED high-brightness light source prepared in advance in the slotted area of the word.
5. After the above steps are completed, package these parts, then spray the favorite paint color on the side, and after drying, make a complete mini light.
Word crafts.
Note on making mini luminous characters with advertising engraving machine:
Keep enough gaps when working on documents, and try to be able to put in the smallest LED module.
Pay attention to the front and back when carving, and don't make mistakes.
When spraying paint, cover the front and back with a sticker and other materials.
Mini-word engraving path: adopt (Wentai) or (type3)
1: Enter the word to be engraved, such as: "five stars", select the text, click on the tool path, select "area engraving" to generate the tool diameter ty3 to do the mini word has the following characteristics: good retouching, simple and clear, easy to operate.
2: type2 is a mini word with automatic tool change function, which is incomparable to other software.
3: Since there are many mini-word paths, layered drawing is used, and the wrong graphic is not selected.
4: Make a file: The customer will give you the original file is usually in CDR format, and then converted to DXF or EPS format. Typesetting according to the size of the appropriate sheet, Note: The material is not saved.
5: Engraving path: using Wentai or type, the engraving is divided into front and back, the engraving bottom is generally at 8mm depth, and the front engraving is divided into 2 steps:
The 6mm single-edged knife is opened twice, and the 3D cutting 28 degree or 30 degree mini knife cutting is layered according to the performance of the machine or a cutting.
Make the base plate {3mm, 5mm acrylic, according to the stroke of the word to determine the use of a few mm of material to do, the bottom plate must be made to have holes, screw holes, easy to install behind.
6: The paint needs to be sprayed 3 times, white primer, gray paint, top coat, see if the customer needs spray oil, the bottom plate is installed, and the bottom panel is bonded.
